Review Details

CC-SLOT lighting suspension system slope ceiling coupler two piece

CC-SLOT lighting suspension system slope ceiling coupler two piece

Product Review (submitted on December 20, 2016):
I have purchased from Total Lighting before and have used this product on two installations in my home. It really makes the installation on a sloped ceiling simple. Nobody will probably notice the Griplock high over their heads but it is high quality and attractive.
CC-SLOT lighting suspension system slope ceiling coupler two piece
CC-SLOT slope ceiling two piece connector for use with our suspension cable system. On a drywall or wood ceiling, simply use a Ez-anchor (drywall) or screw to install part one of the connector. Then put the suspension cable through the second part of the connector. The "stop" on the connector will stop the wire from falling out. Screw this second part of the connector to the first part already installed in the ceiling. Now you are ready to install the slider to the wire and hang your track lighting, linear lighting, display and more! Internal thread is 1/4-20. See our detailed instructions for more information. Contact our design team for assistance with your project.
IMPORTANT NOTE: Although our video shows a round cable end required for this part, a standard cable end "AG" will work fine. We have made modifications in the part to accept both types of "Stoppers" but the round one may delay your shipment as it is a custom part. Standard cables are listed below.
$2.82