LTF LED 60watt no load electronic DC driver transformer 24VDC ELV 0-10 dimmable 277volt input TE60WD24LEDD010

# TE60WD24LEDD010

Be the first to review this product

LTF LED 60watt no load electronic DC driver transformer. 24volt, compact, low profile, small form factor easy to use design. Great for powering DC LED Strips, LED Bulbs, Incandescent & Halogen Bulbs. 277volt input. Dimmable from 0-10V dimming loop. See specification sheet for more information. TE60WD24LEDD010

Designer's Note

No-load electronic transformers can only be bench tested with devices capable of measuring at higher frequencies such as a Fluke 289 or better voltage meter. No-load can be measured this way with or without a load on the device. The reason for this is a lower end meter standard electricians field meter would measure voltage that are DC or < 50-60 Hz only and not this transformer.

Measurements done with a field voltage meter will give an incorrect reading or no reading at all. Please be aware of this when testing the transformer. The no-load is designed for both LED Loads, and halogen / Incandescent bulbs.

However, for standard halogen lighting loads a no-load transformer is not necessary. Total lighting supply offers a video on testing standard transformers. Request the video and we will send it to you.

No-Load transformers can be full loaded to the load specifications. However we cannot guarantee full load performance if your circuit is not engineered correctly for lighting loads, lamp type or wire gauge and length. Proper project engineering is required or downgrading the load on the transformer may be a option.

Example: With a 300watt transformer, one single run at 300watts may required a #10 gauge wire depending on the distance.
Low voltage wire when used on some loads have voltage loss based on load type, wire size and distance from the transformer. Splitting the load when available may be a good option as the amperage at full load is very high.

Feel free to contact us on time sensitive or AIR orders before you place the order

Availability: Typically ships same or next business day!

$40.12

Here to Help

Quality lighting can increase sales, security and property value. Contact us here and we will show you how. Your success is our success.
Also enjoy our video guides and how to's here
Details
No minimum load electronic transformer.
  • Works with DC LED Strips, LED Bulbs, Incandescent & Halogen Bulbs
  • UL recognized/listed Class 2 power supply, meets UL 2108 requirements
  • Short circuit protection
  • Auto reset and thermal protection
  • Soft start technology
  • Fully ELV dimmable, 0-10V Dimming loop
  • Low profile, small form factor
  • Advanced no load technology
  • IP 60 rating
  • Isolated output power per NEC and UL safety requirements
Advantages of electronic transformers
  • Low cost
  • High frequency output -> smaller size
  • Lighter
  • Not prone to flicker like magnetic transformers
  • Auto-reset means they do not require circuit breakers like magnetic transformers
  • No minimum load required -> convenient
  • Higher efficiency -> operate at a lower temperature
  • Available with line filtering for lower conducted and radiated electrical emissions
Where to use electronic transformers
  • Locations that have limited space
  • Locations that are heat sensitive
  • Residential
  • Locations requiring low weight setup
  • Locations that may require transformer to be set up away from source (or close to load)
Disadvantages/When not to use
  • Don't use if location is known to have high temperatures
    • Electronic transformers are heat sensitive
  • May have audible noise
    • Can be resolved with transformer relocation
  • Shorter lifespan (~5-6 yrs)
  • Requires loads to be compatible with high frequency voltages
    • Usually may not work with cheaper LED loads
Additional Information
Color Silver
Warranty Manufacture's 3 Year Limited
Important Note Feel free to contact us on time sensitive or AIR orders before you place the order
Primary Breaker No
Secondary Breaker No
Circuits Single
Terminal Block No
Dimmable Yes - see details
Approvals CE, cULus, FCC, RoHS
Max Load Wattage 60
Min Load Wattage 0
Input Voltage 120VAC
Output Voltage 24VDC
Electric Current Type DC
Dimensions H x W x L (in) 0.96" (24.5mm) x 1.75" (44.5mm) x 4.21" (107mm)
You may also be interested in the following product(s)
Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

LTF LED 60watt no load electronic DC driver transformer 24VDC ELV 0-10 dimmable 277volt input TE60WD24LEDD010
LTF LED 60watt no load electronic DC driver transformer. 24volt, compact, low profile, small form factor easy to use design. Great for powering DC LED Strips, LED Bulbs, Incandescent & Halogen Bulbs. 277volt input. Dimmable from 0-10V dimming loop. See specification sheet for more information. TE60WD24LEDD010
$40.12